United States / Build / The Vale Engineered Cedar Tongue and Groove Siding Panels (8160-2322:0501)
The Vale Engineered Cedar Tongue and Groove Siding Panels (8160-2322:0501) — eave assembly section.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
The profile is traced from the manufacturer's own dimensioned drawing, reviewed and signed. CC BY 4.0.
The Vale Engineered Cedar Tongue and Groove Siding Panels (8160-2322:0501)
This is a listed eave assembly. Listing 8160-2322:0501. This site cites SFM 12-7A-3. Match the model and orientation.
Enter your ZIP to see which local requirement this meets.
The Vale cedar panels have a historical listing for the underside of horizontal projections, but that eaves listing is now marked lapsed.
Visscher's 8160-2322:0501 entry describes engineered cedar tongue-and-groove panels measuring 19/32 inch thick and 5-7/16 inches wide. The assembly includes 7/16-inch exterior-grade OSB sheathing and Tyvek Homewrap. Both the backing and wrap remain part of the described construction beneath the projection.
OSFM names SFM 12-7A-3 as the test protocol for the horizontal-projection-underside application. That application explains why a product called siding appears in an eaves record. The product name should not obscure which part of the building this particular listing addresses.
The listing appeared in the handbook but was absent from the retained BML search. That leaves its current availability unresolved; absence alone does not explain whether it expired, was withdrawn or was renumbered. Before specifying these panels beneath an eave, obtain the current matching listing and Visscher's installation instructions and product data sheets. The historical description identifies the assembly to investigate, without establishing a current listing for the proposed work.
Documents for this product
Each link opens the publisher's own copy, so you read the revision they are shipping today.
Three pages, each a fully dimensioned board end section with a product data block. The Micro V page is the one traced. Its 19/32 in matches this listing exactly.
Not present in the live OSFM BML as of 2026-08-25, though it appeared in the 2025-09-02 WUI handbook. The listing may have expired, been withdrawn, or been renumbered. Do not specify against the OSFM listing without confirming on GOVmotus.
Listing is from the OSFM WUI handbook. Confirm the live GOVmotus record and the exact model before specification.
The Vale Engineered Cedar Tongue and Groove Siding Panels (8160-2322:0501). FireApproved. https://fireapproved.com/materials/visscher-lumber-inc-the-vale-engineered-cedar-tongue-and-groove-siding-8160-2322-0501/. Last verified 2026-08-23.
