Home / Requirements / 2006 Utah UWUI Class 2 solid eave enclosure

2006 Utah UWUI Class 2 solid eave-enclosure path

The 2006 Utah UWUI specifies solid material at least three-quarter inch thick around combustible eaves, fascias, and soffits in Class 2 construction.

This row covers documented thickness and solid-surface attributes for an eave product. Complete enclosure, combustible-substrate context, rafter tails, fastening, assigned class, local map, project, and approval remain separate checks.

code · Utah local compliance agencies adopting the 2006 Utah Wildland-Urban Interface Code · Last verified 2026-08-27 · JSON (CC BY 4.0)

Published requirement text

“Combustible eaves, fascias and soffits shall be enclosed with solid materials with a minimum thickness of 3/4 inch (19 mm).”

2006 Utah Wildland-Urban Interface Code, Section 505.3 — International Code Council (hosted by Sanpete County)

Where this instrument is documented

Instrument utah-uwui-2006.

Set a location to read how this instrument lands where you are.

Place	Force	Reach	Dated	Checks open	Source
Salt Lake City	active application documented	mapped area	not sourced	6	Salt Lake City Code 18.44.010 International Fire Code and Standards Adopted
Taylorsville	active application documented	mapped area	effective 2025-12-18	5	Taylorsville Ordinance 25-15 Utah Wildland Urban Interface Code

Each place page carries that place's boundary, project scope and open official checks in full; this page's JSON twin carries them per application.

Machine-readable constraints

Attribute	Operator	Value	Unit
solidSurface	eq	true
thicknessIn	gte	0.75	inch

Sources

2006 Utah Wildland-Urban Interface Code, Section 505.3 — International Code Council (hosted by Sanpete County) (official). Accessed 2026-08-27.

2006 Utah UWUI Class 2 solid eave-enclosure path. FireApproved. https://fireapproved.com/requirements/utah-uwui-2006-class-2-solid-eave-enclosure/. Last verified 2026-08-27.