Enter your ZIP to see which local requirement this meets.
SFM 12 7A 3 is the test standard on attributes, and the same table records 1 documented attribute conflict. OSFM 8160-2246:0500 is the identifier for this Paneltek soffit.
Warnings cite handbook provenance for the listing and ask to match a live GOVmotus row to the exact soffit model. That conflict plus handbook provenance is why the model string is the comparable object, not the eaves category.
THE DOCUMENT THAT TURNED A CENSUS HIT INTO A NO-FIGURE. Its THICKNESS column reads `15mm(5/8”)` for every length of both the 1x4 (97mm/3.8" width) and the 1x6 (139mm/5.5" width) — and 15 mm is 0.5906 inch, which is 19/32" and is NOT 5/8" (0.625 in, 15.875 mm). So the manufacturer's own specification contradicts itself inside a single table cell: its metric value agrees with the OSFM listing and its imperial parenthetical agrees with the drawing. Both Visscher and Canyon print the same 15 mm alongside 19/32", which is the corroboration that makes the parenthetical the outlier rather than the metric.
One page, two dimensioned end sections, no text layer — rendered at 150 dpi and read as an image. Both sections print a 5/8" thickness, which CONFLICTS with this record's own OSFM listing at 19/32". Covers the 1x6 only; the listing also covers a nominal 4" width for which no drawing is published.
Documented attributes
Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
Paneltek Engineered Cedar external soffit for external use in Wildland-Urban Interface Are. FireApproved. https://fireapproved.com/materials/paneltek-products-ltd-paneltek-engineered-cedar-external-soffit-for/. Last verified 2026-08-23.