Nusku Partners LLC (8160-2064:0502) — eave assembly section.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
The profile is traced from the manufacturer's own dimensioned drawing, reviewed and signed. CC BY 4.0.
Nusku Partners LLC (8160-2064:0502)
This is a listed eave assembly. Listing 8160-2064:0502. This site cites SFM 12-7A-3. Match the model and orientation.
Enter your ZIP to see which local requirement this meets.
Nusku Terratek engineered cedar tongue-and-groove panels are listed for eave undersides with OSB backing and a moisture barrier.
The 8160-2064:0502 listing describes panels 19/32 inch thick and 5-7/16 inches wide. They install on exterior-grade oriented strand board measuring 7/16 inch thick, together with the moisture barrier. These are panel and backing dimensions, not interchangeable thickness choices.
Although Terratek's product description says siding panels, OSFM lists this construction for horizontal-projection undersides and identifies testing as SFM 12-7A-3. That gives an eave specification a different source scope from a wall-siding listing. Keep the underside use, tongue-and-groove panels and backing together in the detail; follow Nusku's installation instructions and product data sheets, and confirm the exact entry in GOVmotus.
Documents for this product
Each link opens the publisher's own copy, so you read the revision they are shipping today.
PUBLISHES A CONFLICT AGAINST THIS LISTING. The listing states 19/32 inch thick by 5-7/16 inch wide; the drawing dimensions .6875 inch thick and 5.50 inch face. Precedence puts the manufacturer's dimensioned drawing above listing prose; lane INGEST-C wrote the two attributeConflicts rows on 2026-08-28 and the winning values with them, so nothing is resolved silently. The page 2 Micro V-Groove section is what pf-fam-nusku-terratek-1x6-micro-v-groove.svg traces; the page 1 Nickel Gap section is the same board with a square-shouldered edge and is not traced in this lane.
Documented attributes
Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
