United States / Build / Canyon Lumber Company (8140-2380:0001)

Canyon Lumber Company (8140-2380:0001): type figure and course assembly, drawn from this record's sourced dimensions. No dimension is drawn that its source did not publish.
Canyon Lumber Company (8140-2380:0001) — type figure and course assembly. Drawn from this record's own sourced values; every dimension on it is one a published document states, and a parameter the source did not publish is named on the drawing rather than estimated. The profile is traced from the manufacturer's own dimensioned drawing, reviewed and signed. CC BY 4.0.

Canyon Lumber Company (8140-2380:0001)

This is a listed siding assembly. Listing 8140-2380:0001. This site cites SFM 12-7A-1. Match the model and orientation.

Kind: listed-assembly. Brand: Canyon Lumber Company. Listing evidence: OSFM WUI handbook 2026-08-25. Page reviewed 2026-08-23. JSON (CC BY 4.0)

View Saved

Can you use it here?

Enter your ZIP to see which local requirement this meets.

Canyon's Western Red Cedar tongue-and-groove panels are listed for wildfire-area walls as a specified backed assembly.

Listing 8140-2380:0001 describes nominal 1-by-6-by-19/32-inch-thick panels. Lengths of 4 to 7 feet and 8 to 16 feet are laminated onto a western red cedar core that is finger-jointed and edge-glued.

The wall uses 2-by-4-inch SPF lumber at 16-inch centers, 1/2-inch exterior-grade OSB sheathing and Typar building wrap. OSFM names SFM 12-7A-1 as the test protocol. Keep the framing, sheathing and wrap with the laminated cedar panels when comparing wall designs.

Match the complete construction to the manufacturer's installation instructions and product data sheets. Confirm this exact wall listing in GOVmotus before specification; the cedar face alone does not establish the backing assembly.

Documents for this product

Each link opens the publisher's own copy, so you read the revision they are shipping today.

CAD drawings

  • 1x6 The Micro V — Western Red Cedar Veneer, dimensioned end section and specification block — Canyon Lumber Company · dated 2024-01-11 · PDF
    Two pages. Page 1 is a fully dimensioned board end section — overall 5-7/16 in (138 mm), thickness 19/32 in (15 mm), micro-V 1/16 in (1.5 mm), tongue 1/4 in (6.35 mm), TWO ID GROOVE back kerfs — beside a specification block printing FINISHED COVERAGE 5-3/16 in (132 mm). The overall less the coverage is exactly the printed tongue. The PDF carries no extractable text; it was rendered to PNG at 600 dpi and read from the raster.

Documented attributes

Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.

AttributeValueEvidence source
Fire
Test standard sfm 12 7a 1 OSFM Building Materials Listing — 8140-2380:0001 (official-listing · Listing 8140-2380:0001, TEST PROTOCOL)TEST PROTOCOL: SFM 12-7A-1

Published requirement matches

These links are generated from the cited attributes above. They do not decide installation or a project result.

ProgramID / sourceEvidence dateExpiresStatus
CAL FIRE BML 8140-2380:0001 · Search BML for 8140-2380:0001 2026-08-25 2027-06-30 listed

Tests and programs cited

Specification notes

Sources

Canyon Lumber Company (8140-2380:0001). FireApproved. https://fireapproved.com/materials/canyon-lumber-company/. Last verified 2026-08-23.