Canyon Lumber Company (8160-2380:0002) — eave assembly section.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
CC BY 4.0.
Canyon Lumber Company (8160-2380:0002)
This is a listed eave assembly. Listing 8160-2380:0002. This site cites SFM 12-7A-3. Match the model and orientation.
Canyon Lumber Company nominal 1" X 6" X 19/32" thick Western Red Cedar Tongue & Groove Siding Panels. Wall assembly consists of 2 in. x 4 in. SPF lumber spaced 16 in. on center, 1/2 in. exterior grade OSB sheathing, Typar building wrap. 4' to 7' lengths and 8' to 16' lengths laminated onto a western red finger jointed, edge glued cedar core. Refer to the manufacturer's installation instructions and product data sheets.
Two pages, NO TEXT LAYER AT ALL — both had to be rendered at 150 dpi and read as images, which is the census's own warning arriving again. Page 1 is 1x6 THE MICRO V, page 2 is 1x6 THE FINE LINE, and BOTH print 19/32" (15mm) as the thickness, so the number this record's listing states does not depend on which of the manufacturer's two 1x6 patterns the listing covers. Cited here as corroboration; the value is taken from the listing, which names it for this listing number directly.
Documented attributes
Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
Canyon Lumber Company (8160-2380:0002). FireApproved. https://fireapproved.com/materials/canyon-lumber-company-8160-2380-0002/. Last verified 2026-08-23.
