United States / Build / Shakertown Craftsman one-course cedar shingle panels
Shakertown Craftsman one-course cedar shingle panels
This is a listed siding assembly. Listing 8140-2032:0001. This site cites OSFM BML. Match the model and orientation.
Shakertown Craftsman panels are eight-foot, one-course siding panels made from clear vertical-grain Western red cedar in 4.5-, 7-, and 14-inch exposures. Current CAL FIRE OSFM listings 8140-2032:0001 and 8140-2032:0002 cover horizontal wall installations over specified OSB sheathing; the two listings describe different plywood-backed and exposure configurations.
Its drawing is an installation wall section, not a dimensioned product profile: its only dimensions are the 1/2"x1" furring strip and the minimum 6" ground clearance. The panel itself is dimensioned nowhere in it.
Documented attributes
Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
horizontal exterior wall siding; match listing 8140-2032:0001 or :0002 assembly details
Craftsman Panel — 7-inch exposure
horizontal exterior wall siding under listing 8140-2032:0002
Craftsman Panel — 14-inch exposure
horizontal exterior wall siding under listing 8140-2032:0002
Specification notes
Listing 8140-2032:0001 requires a plywood-backed panel, 3/8-inch shingle butt, overlapping end joints, minimum 7/16-inch OSB, and No. 15 building paper. Listing 8140-2032:0002 has a distinct exposure-based design. Match the selected panel to the exact current OSFM sheet.
Both OSFM listings are horizontal-only. Manufacturer literature for other Craftsman products or assemblies does not expand the listed scope.
Shakertown's product page separately states Class B and ASTM E2707 performance, but the current OSFM sheets state Chapter 7A compliance without naming a test protocol. Obtain the applicable test report before treating that manufacturer statement as the listing basis.