MAC Metal steel siding and vented soffit profiles

Spec sheets

• MAC Metal Data Sheet — HARRYWOOD PLUS, prefinished steel wall profile without visible screws — MAC Metal Architectural · PDF
  Two pages. A specification table and photographs; NO dimensioned section and no orthographic profile drawing anywhere in it. Publishes Height (covered) 6.0625 in (154 mm), Thickness (depth) 0.29 in (7.3 mm), standard length 144 in, gauge 26 or 24, ventilation 4.94 sq in per linear foot for the vented option, and Installation orientation horizontal | vertical | diagonal. Page 2 cites the W.U.I. accreditation as Inscription 8140-2358-0500, where this FA record carries OSFM listing 8170-2358:0001 — two different listings under one manufacturer code, unreconciled.
• MAC Metal Data Sheet — NORWOOD, prefinished steel wall profile without visible screws — MAC Metal Architectural · PDF
  Same format and the same absence of a section drawing. Height (covered) 5.38 in (136.652 mm), Thickness (width) 0.44 in (11 mm), Installation orientation horizontal | vertical | diagonal.
• MAC Metal Data Sheet — MS 1, MS 2 and MS AUTHENTIC — MAC Metal Architectural · PDF
  One sheet serving THREE of this record's named profiles. Height (covered) 19.25 in (488.95 mm), Thickness (width) 1.0625 in (27 mm), Installation orientation VERTICAL only. Set against Harrywood Plus at 6.0625 in and Norwood at 5.38 in, the covered height across this record's twenty-four named profiles spans 5.38 to 19.25 in and the orientation spans vertical-only to any — which is why no single covered height, thickness or course rhythm can be read for this record. The blocker is the record's scope, not the sources: MAC Metal publishes a data sheet per profile and none of them carries a drawing.