BODYGUARD WOOD PRODUCTS (8140-2022:0003)
This is a listed siding assembly. Listing 8140-2022:0003. This site cites OSFM BML. Match the model and orientation.
Can you use it here?
Enter your ZIP to see which local requirement this meets.
Bodyguard No.
430 two-lap siding is listed for wildfire-area walls with horizontal installation and a specified sheathing minimum.
The design in CAL FIRE listing 8140-2022:0003 is preservative-treated pine with a minimum dimension of 1 by 6 inches. It excludes through holes and loose knots. These are material-selection conditions, so a matching lap pattern alone is not enough to identify an acceptable piece for this assembly.
The backing must be oriented strand board at least 7/16 inch thick. Keep that sheathing requirement with the siding dimensions and wood condition when reviewing a proposed wall. The installation is horizontal only; the listing supplies no permission to rotate the same profile into a vertical arrangement.
The specified profile is the two-lap No. 430. Match that number and the complete wall construction against the supplier's data, then follow the manufacturer's installation instructions. The handbook also directs readers to the product data sheets. Confirm the exact listing through GOVmotus before specifying it. The practical check is a horizontal wall made with the named siding, suitable pieces and the required OSB backing, rather than an unqualified Bodyguard brand reference.