BODYGUARD WOOD PRODUCTS (8140-2022:0002) — type figure.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
The profile is traced from the manufacturer's own dimensioned drawing, reviewed and signed. CC BY 4.0.
BODYGUARD WOOD PRODUCTS (8140-2022:0002)
This is a listed siding assembly. Listing 8140-2022:0002. This site cites OSFM BML. Match the model and orientation.
Bodyguard® “RAB Smooth Face R/S” back siding Nos. 371 and 372, preservative treated pine, minimum 1x6 inches dimension, with no through holes or loose knots, installed over oriented strand board (OSB) with a 7/16” minimum thickness. For horizontal installation only. Refer to the manufacturer's installation instructions and product data sheets.
Dimensioned profile section (11/16" thick edge, 9/32" thin edge, 1/2" wide x 9/32" deep rabbet) with an A/B pattern table for 371, 372 and 373. The listing covers 371 and 372.
Not present in the live OSFM BML as of 2026-08-25, though it appeared in the 2025-09-02 WUI handbook. The listing may have expired, been withdrawn, or been renumbered. Do not specify against the OSFM listing without confirming on GOVmotus.
Not present in the live OSFM BML as of 2026-08-23, though it appeared in the 2025-09-02 WUI handbook. The listing may have expired, been withdrawn, or been renumbered. Do not specify against the OSFM listing without confirming on GOVmotus.
Listing is from the OSFM WUI handbook. Confirm the live GOVmotus record and the exact model before specification.
