Enter your ZIP to see which local requirement this meets.
Attributes identify roof-covering · class-a for this record. Solarhide underlayment, shake or slate profile, plywood deck, staples, tile nails, and a 3/8-inch tile gap are the match set on warnings for the coveringclass-a row. ASTM E108 is the test standard on attributes.
OSFM 8180-2272:0500 is the identifier for that complete listed assembly. Covering Class A here is the assembly, not a tile standing alone.
Lot comparison is how that assembly meets a place. The 3/8-inch tile gap is part of the listed match set, not an optional aesthetic.
Documented attributes
Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
22-inch-long, 5/8-inch-butt composite shakes in 4-, 6-, 7-, 8-, and 9-inch widths
DaVinci Single-Width Shake
22-inch-long, 5/8-inch-butt composite shakes in a 9-inch width
DaVinci Multi-Width Slate
1/2-inch-butt composite slates in 6-, 7-, 9-, 10-, and 12-inch widths
DaVinci Single-Width Slate
1/2-inch-butt composite slates in a 12-inch width
Specification notes
Class A applies to the complete listed assembly. Match the shake or slate profile, plywood deck, Solarhide underlayment, staples, tile nails, 3/8-inch tile gap, flashing, and installation details to OSFM listing 8180-2272:0500 and the current DaVinci guide.