United States / Build / Sabra Brand “IPE” solid wood square edge deck board, 3/4” thick x 5-5/16” width
Sabra Brand “IPE” solid wood square edge deck board, 3/4” thick x 5-5/16” width — end section.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
CC BY 4.0.
Enter your ZIP to see which local requirement this meets.
Sabra Brand IPE square-edge decking is listed for wildfire-area use with stated board dimensions, nominal density and an attached-wall condition.
OSFM listing 8110-2053:0100 describes solid-wood boards 3/4 inch thick and 5-5/16 inches wide. It gives density as nominal 63.2 pounds per cubic foot, without establishing a minimum density. SFM 12-7A-4A is the named test protocol.
ASTM E84 was not conducted, according to the handbook. A Sabra deck's attached exterior wall must have noncombustible or ignition-resistant covering. This describes a wall-material condition, without giving the boards an ASTM E84 flame-spread class.
Use the Sabra product identity and square-edge profile when checking the boards, then carry the dimensions, density description and wall covering into the installation review. The manufacturer's instructions and data sheet provide the detailed construction information. Confirm the exact GOVmotus listing before specifying the deck.
Documents for this product
Each link opens the publisher's own copy, so you read the revision they are shipping today.
