Fiber Composites, LLC (8110-2045:0008) — end section.
Drawn from this record's own sourced values; every dimension on it is one a
published document states, and a parameter the source did not publish is
named on the drawing rather than estimated.
The profile is traced from the manufacturer's own dimensioned drawing, reviewed and signed. CC BY 4.0.
Fiber Composites, LLC (8110-2045:0008)
This is a listed decking assembly. Listing 8110-2045:0008. This site cites SFM 12-7A-4. Match the model and orientation.
Enter your ZIP to see which local requirement this meets.
Fiberon Paramount PVC decking is listed with rounded or grooved edges, but its dimensional wording differs between the handbook and later BML description.
The handbook's 8110-2045:0008 listing describes planks 15/16 inch thick by 5-1/2 inches wide and states 3/16-inch edge-to-edge spacing. It names SFM 12-7A-4A as the protocol and Class A flame spread as the rating. Those dimensions and the stated spacing belong to the handbook description of Paramount.
The retained BML description instead calls the boards nominally 1 inch thick by 6 inches wide, still with rounded or grooved edges. It does not repeat the board gap. Keep the source wording distinct when comparing a supplied board with the listing; these descriptions do not establish a new gap or prove that their measurements are interchangeable.
Resolve the dimensional match with the current GOVmotus description and the manufacturer's installation instructions and product data sheets. The task is to identify the listed Paramount profile and its installation, preserving the handbook's spacing information while checking the later nominal-size description.
Documents for this product
Each link opens the publisher's own copy, so you read the revision they are shipping today.
