United States / Build / UE2011 (22"x3.5"), UE2021 (14"x3.5"), UE2031 (14"x5"), UE2041 (22"x3")
UE2011 (22"x3.5"), UE2021 (14"x3.5"), UE2031 (14"x5"), UE2041 (22"x3") This is a listed vent assembly. Listing 8165-2232:0502. This site cites ASTM E2886. Match the model and orientation.
Listed · limited evidence. Active CAL FIRE BML listing 8165-2232:0502, expires 2027-06-30 (verified against the live BML 2026-08-25). Limited evidence: a single positive channel so far — more programs or documentation may still move this record. This status is computed from the cited evidence by the published rule, never hand-assigned.
▲ CAL FIRE BML 8165-2232:0502 · active
Models UE2011 (22"x3.5"), UE2021 (14"x3.5"), UE2031 (14"x5"), UE2041 (22"x3"), UE2051 (22"x5.5"), CS2011 (120"x3"), CS2021 (120"x5.5"), and CS2031 (120"x2") Soffit and Undereave Vents. Models GV2011 (12"x12"), GV2021 (12"x18"), GV2041 (14"x18"), GV2051 (14"x24"), GV2071 (18"x24"), and GV2081 (22"x30") Gable Vents. Models FV2011 (14"x6") and FV2021 (16"x8") Foundation Vents. Units are constructed of 26 gauge, hot dipped, galvanized steel with a 1/8" wire mesh on the back side of vent.
Kind: listed-assembly.
Brand: Brandguard Vents . Listing evidence: OSFM WUI handbook 2026-08-25.
Page reviewed 2026-08-23. JSON (CC BY 4.0)
Can you use it here?
Enter your ZIP to see which local requirement this meets.
Documents for this product Each link opens the publisher's own copy, so you read the revision they are shipping today.
Spec sheets Key Specification — 5" x 14" Soffit Vent Model UE2031-PG (top, side and bottom views, dimensioned isometric) — BrandGuard Vents · dated 2022-09-09 · PDF Covers UE2031 exactly — one of this record's sixteen models. NO TRACED ASSET WAS CUT FROM IT, and the reason is the record rather than the drawing: sixteen models spanning soffit (UE, CS), gable (GV) and foundation (FV) vents from 14 x 5 to 22 x 30 have no single face to draw, and putting UE2031's 14 x 5 plan on the record would present a member as the family. The sheet also has no section: its side view is an edge elevation, and the overlapping-baffle geometry appears only in an isometric, which would have to be reconstructed rather than traced. It carries two things the record does not: a mesh aperture printed as .0625 x .0625 against the listing's 1/8 inch, and a 23-gauge wire. Both are recorded in docs/research/2026-08-28-trace-vents-eaves.md §2.4.
Documented attributes Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
Published requirement matches These links are generated from the cited attributes above. They do not decide installation or a project result.
Models named on the listing Model Application UE2011 (22"x3.5") UE2021 (14"x3.5") UE2031 (14"x5") UE2041 (22"x3") UE2051 (22"x5.5") CS2011 (120"x3") CS2021 (120"x5.5") CS2031 (120"x2") GV2011 (12"x12") GV2021 (12"x18") GV2041 (14"x18") GV2051 (14"x24") GV2071 (18"x24") GV2081 (22"x30") FV2011 (14"x6") FV2021 (16"x8")
Specification notes Listing is from the OSFM WUI handbook. Confirm the live GOVmotus record and the exact model before specification. Can I use this here How this product meets each requirement (8)
Requirement constraints (8)
Each table compares this product's documented attributes with one published requirement.
The comparison does not change from place to place, so it is printed once.
ORSC R327 vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh, soffit vent Not documented undocumented Mesh opening Mesh opening 0.0625 in–0.125 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
IWUIC vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh, soffit vent Not documented undocumented Mesh opening Mesh opening ≤ 0.125 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
Colorado CWRC vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh, soffit vent Not documented undocumented Mesh opening Mesh opening ≤ 0.125 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
2018 IWUIC Class 1–2 vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh Not documented undocumented Mesh opening Mesh opening ≤ 0.25 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
2021 IWUIC Class 1–2 vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh Not documented undocumented Mesh opening Mesh opening ≤ 0.25 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
2006 Utah UWUI Class 1–2 vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh Not documented undocumented Mesh opening Mesh opening ≤ 0.25 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
2006 Utah UWUI Class 3 vent mesh undocumented Field Required Documented value State Assembly role Assembly role is one of foundation vent, retrofit mesh, soffit vent Not documented undocumented Mesh opening Mesh opening ≤ 0.25 in Not documented undocumented Corrosion resistant Corrosion resistant = Yes Not documented undocumented Noncombustible Noncombustible = Yes Not documented undocumented
UE2011 (22"x3.5"), UE2021 (14"x3.5"), UE2031 (14"x5"), UE2041 (22"x3"). FireApproved. https://fireapproved.com/materials/brandguard-vents-ue2011-ue2021-ue2031-ue2041/. Last verified 2026-08-23. Verify at the source. Every listing number and claim here links to its origin — listings change and local amendments govern, so check the current record before you specify.