Home / Materials / Action Industries Standard WeatherBlock seal
Action Industries Standard WeatherBlock seal This is a retrofit component this site records. It is not, by itself, an adopted-code approval.
Attribute match · limited evidence. Documented attributes match 1 published requirement — no listing program applies. Verify with your authority having jurisdiction or ARC. Limited evidence: a single positive channel so far — more programs or documentation may still move this record.
▲ documented attributes match 1 requirement
Status derived from the cited listings by a published rule, never hand-assigned. Each chip
above is one evidence channel and its direction. A listing is not a permit — the authority
having jurisdiction decides.
A brush seal with an EPDM insert, documented in multiple bristle widths for Action Industries standard aluminum retainers.
Kind: retrofit-component.
Brand: Action Industries .
Page reviewed 2026-08-24. JSON (CC BY 4.0)
Documented attributes Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.
Published requirement matches These links are generated from the cited attributes above. They do not decide installation or a project result.
Models named on the listing Model Application B0766-RI-W B0767-RI-W B0768-RI-W B0769-RI-W B0770-RI-W B0771-RI-W B0772-RI-W
The manufacturer documents compatibility with its standard retainers; confirm the installed retainer and gap geometry. Product selection does not establish continuous contact around a moving door. Can I use this here
This trace joins product evidence to a sourced code application, then keeps every boundary,
map, date, project check, documented constraint match, and still-undocumented field visible.
It is not a permit result.
Full explorer: Can I use this here .
Set a location for the local trace Without a place, no local application is inferred. The collapsed jurisdiction index below keeps every sourced static trace available.
Set a ZIP to read the local force for this product. Every static jurisdiction trace stays below.
In this place , this meets the guidance CAL FIRE garage-door seal rule.
The rule and every matching product for the United States
Save to my house How this product meets each requirement (1)
Requirement constraints (1)
Each table below compares this product's documented attributes against one published
requirement. That comparison is a fact about the product and the requirement, and does not
change from place to place, so it is printed once.
Requirement constraints (1)
Each table compares this product's documented attributes with one published
requirement. That comparison does not change from place to place, so it is printed
once here and linked from every jurisdiction below.
California SFM 12-7A-1 door undocumented Field Required Documented value State Test standard Test standard = sfm 12 7a 1 Not documented undocumented
Where this applies
A product is a national record; where it applies is a fact about a place. The rule that
binds a given address — and every product matching it — is published on that place's own
answer page, linked above and re-linked by the location lens. The complete per-place
claim graph for this record, including every open official check, is in its
JSON twin .
Action Industries Standard WeatherBlock seal. FireApproved. https://fireapproved.com/materials/action-industries-standard-weatherblock/. Last verified 2026-08-24. Verify at the source. Every listing number and claim here links to its origin — listings change and local amendments govern, so check the current record before you specify.