Home / Materials / Action Industries EPDM bottom T-end weather seal

Action Industries EPDM bottom T-end weather seal

Name: Action Industries EPDM bottom T-end weather seal
Brand: Action Industries

This is a retrofit component this site records. It is not, by itself, an adopted-code approval.

An EPDM bottom seal documented for residential and commercial garage doors with compatible T-end retainers.

Kind: retrofit-component. Brand: Action Industries. Page reviewed 2026-08-24. JSON (CC BY 4.0)

Documented attributes

Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.

Attribute	Value	Evidence source
Assembly role	garage door seal	EPDM bottom T-end weather seal (manufacturer)

Published requirement matches

These links are generated from the cited attributes above. They do not decide installation or a project result.

CAL FIRE garage-door seal · California

The seal requires a compatible retainer and continuous contact with the floor; verify the installed gap along the full door width.
The manufacturer does not publish a wildfire listing for this seal on the cited page.

Can I use this here

This trace joins product evidence to a sourced code application, then keeps every boundary, map, date, project check, documented constraint match, and still-undocumented field visible. It is not a permit result. Full explorer: Can I use this here.

Set a location for the local trace

Without a place, no local application is inferred. The collapsed jurisdiction index below keeps every sourced static trace available.

Set a ZIP to read the local force for this product. Every static jurisdiction trace stays below.

The rule and every matching product for the United States

Requirement constraints (1)

Each table below compares this product's documented attributes against one published requirement. That comparison is a fact about the product and the requirement, and does not change from place to place, so it is printed once.

Requirement constraints (1)

Each table compares this product's documented attributes with one published requirement. That comparison does not change from place to place, so it is printed once here and linked from every jurisdiction below.

California SFM 12-7A-1 door undocumented
Field	Required	Documented value	State
Test standard	Test standard = sfm 12 7a 1	Not documented	undocumented

Where this applies

A product is a national record; where it applies is a fact about a place. The rule that binds a given address — and every product matching it — is published on that place's own answer page, linked above and re-linked by the location lens. The complete per-place claim graph for this record, including every open official check, is in its JSON twin.

Sources

EPDM bottom T-end weather seal — Action Industries (manufacturer). Accessed 2026-08-24.

Action Industries EPDM bottom T-end weather seal. FireApproved. https://fireapproved.com/materials/action-industries-epdm-bottom-t-end-weather-seal/. Last verified 2026-08-24.