United States / Build / Action Industries garage-door brush seal kit

Action Industries garage-door brush seal kit

Name: Action Industries garage-door brush seal kit
Brand: Action Industries

This is a retrofit component this site records. It is not, by itself, an adopted-code approval.

A pre-cut side-and-top brush-seal kit documented for sectional, overhead, rolling-steel, and residential garage doors.

Kind: retrofit-component. Brand: Action Industries. Page reviewed 2026-08-24. JSON (CC BY 4.0)

View Saved

Can you use it here?

Enter your ZIP to see which local requirement this meets.

Documented attributes

Each value below points to its field-level manufacturer, official-listing, test-report, or standard-body evidence.

Attribute	Value	Evidence source
Form
Assembly role	garage door seal	Brush seal kits (manufacturer)

Where this product goes

FA Exhibit DET-020. Garage door perimeter: the gap inventory + weatherseal retrofit

Published requirement matches

These links are generated from the cited attributes above. They do not decide installation or a project result.

CAL FIRE garage-door seal · California

Specification notes

Retainer profile, seal size, door type, and field gaps must be checked before selection.
A kit for the side and top does not address the door bottom or confirm continuous installed contact.

Can I use this here

Local force

The rule and every matching product for the United States

Requirement constraints (1)

Each table compares this product's documented attributes with one published requirement. The comparison does not change from place to place, so it is printed once.

California SFM 12-7A-1 door undocumented
Field	Required	Documented value	State
Test standard	Test standard = sfm 12 7a 1	Not documented	undocumented

Sources

Brush seal kits — Action Industries (manufacturer). Accessed 2026-08-24.

Action Industries garage-door brush seal kit. FireApproved. https://fireapproved.com/materials/action-industries-brush-seal-kit/. Last verified 2026-08-24.